PRODUCTS & PRESS
CHASSIS ENGINEERING
RELEASES NEW CARBON
BOTTLE FILLER STAND
■ Yet another new product from the
creative minds at Chassis Engineer-
ing in Riviera Beach, Florida. If you
have carbon bottles you know how
hard they are to fill. Not anymore,
this unique compact stand sits on
your scale to secure your carbon
bottle while you fill it up. Made of
.090 carbon steel and lined with
rubber where the bottle rests in the
stand. The part number is C/E5515
and costs $75.00 plus shipping. Call
800-327-9402 for more informa-
tion. Carbon bottle not included.
IMPACT PHENOM SS HELMET
■ New for 2019 is Impacts first FIA
8859-2015 homologated helmet.
The Phenom SS was designed to
meet the requirements of the new
FIA 8859-2015 and the New Snell
SA2015 ratings. Using a proprie-
tary Carbon-Kevlar composition,
the shells offer greater strength at a
lighter weight than helmets manu-
factured from traditional fiberglass
composites. The helmet has also
been wind-tunnel tested to maxi-
mize exterior vent placement and
flow, while reducing buffeting in
open cockpit applications. Impact
also introduces a new size: Me-
dium/Large. This M/L size takes
advantage of using the smaller,
XS-MED shell which is lighter and
more compact than the standard
size Large shell.
The Phenom SS features a wide,
peripheral eye opening that can
be used for open wheel or closed
cockpit driving. Multiple exterior
68 | D r a g
vents increase circulation to a re-
designed interior. The interior has
channels which not only cool the
drivers head, but has additional
channels which route air towards
the shield, which reduces the
chance of shield fogging. The Phe-
nom SS has removable, washable
padding that can be repositioned
for a comfortable fit. All interior
seams have been removed from
areas where greater pressure is ex-
erted on the head. The Phenom
SS has also been designed to ac-
commodate a drink tube and an
intercom system. Available in flat
black only, sizes XS to XXL. The
Phenom SS has Hans clips pre-
installed which can easily be re-
moved and replaced with the FHR
post of your choice. FIA 8859-2015
(with Hans posts installed) and
Snell SA2015 approved (regardless
of FHR posts installed).
Retail/MAP price of $750.00.
I l l u s t r a t e d | DragIllustrated.com
MOROSO’S BBC MARK IV
8” DEEP OIL PAN
■ Moroso introduces a BBC Mark
IV 8” deep, Power Kicked-Out Alu-
minum Oil Pan, Part No. 20486
with -16 A.N. external pickup for
external oil pump applications.
Fits Competition Eliminator, Su-
per Gas, Super Comp and Bracket
Cars. Installation may require
modifications to cross-member.
This aluminum fully fabricated oil
pan clears 4.75” stroke with steel
or aluminum rods. The double
kicked-out design ensures large
stroke clearance, wide main cap
clearance and maximum horse-
power. Billet end seals ensure
consistent sealing surface to billet
front covers and rear main caps.
Comes with a full length solid lou-
vered windage tray with main cap
partitions for maximum power and
oil control. Includes a billet alu-
minum female -16 A.N. external
pickup and includes O-ring mag-
netic drain plug, two -8 A.N. drain
backs, alternator notch and dip-
stick bung. For use with 168-tooth
flywheel combinations.
Issue 145