PRODUCTS & PRESS
NEW JUNIOR DRAGSTER
TIRE COVERS FROM
STROUD SAFETY
■ Specifically designed for Junior
Dragster rear tires, Stroud tire
covers protect and keep the tires
clean for consistent, maximum
performance. Since these covers
also block harmful UV radiation,
tire life is improved and durometer
readings are maintained through-
out the life of the tire.
The covers are manufactured at
the Stroud facility of heavy nylon
and durable strapping with velcro
attachments. Convenient carrying
handles are an added bonus. Sold
in pairs, refer to item# 901.
Stroud Safety has been supply-
ing competitive drivers with drag
chutes and launchers, seat belts,
window nets, ballistic blankets
and diapers, fire suits, fire suppres-
sion systems, and more for over 30
years! Stroud re-certifies all their
SFI rated products and specializes
in custom design applications for
many of their products.
Call 405-632-2022 for a free
catalog, or visit the website at www.
stroudsafety.com. You can also fol-
low us on Facebook, Instagram,
and YouTube.
JEGS 1-1/2 TON SCISSOR JACK
■ Built to last with an expanded
base for extra stability, JEGS Scis-
sor Jack fits nicely into compact
spaces so you can depend on it to
provide the right support when you
need it.
• 3,000 lb. Load Capacity
• 4 in. to 15 in. Lift Range
• 17.80 in. L x 4.75 in. W x 4 in. H
Collapsed Size
• Oversize 15 in. x 4.75 in. Base for
Extra Stability & Support
• Precision Threaded Shaft
• Black Steel Construction
JEGS THROTTLE BODY
ADAPTER FOR 2015-2017
FORD MUSTANG GT350
WILWOOD DISC BRAKES
HIGH-PERFORMANCE
FLOATING D52-R
RACING CALIPER
■ Built specifically
for the racing indus-
try, the D52-R caliper
is constructed using
a forged aluminum
Type III hard anodize
body with a 2.75” or
2.38” stainless steel
piston. Weighing
only 4.3 pounds, the
D52-R caliper pro-
vides a lower deflection rate and
high-volumetric efficiency when
compared to current heavier cast
models. The caliper fluid inlet port
is centered directly behind the pis-
ton, eliminating interference with
the slide pins. Caliper mounting
64 | D r a g
uses the original GM stock height
and offset. Fits common 11.75”, or
12.19” (up to 12.50”) diameter ro-
tors and a choice of .81”, 1.00” or
1.25” rotor width.
Two slide pins (P/N 230-0542)
are required and sold separately.
I l l u s t r a t e d | DragIllustrated.com
■ Give your GT Mustang a
boost in performance with JEGS
Throttle Body Adapter. Machined
with a tapered opening to reduce
incoming air and fitted with an
integrated O-ring to help prevent
vacuum leaks, this billet alumi-
num adapter allows a large Shelby
GT350 87 mm throttle body to
be used on a standard 2015-2017
Mustang GT intake.
• 2015-2017 Ford Mustang GT 5.0L
• Stock Intake to 87 mm Throttle
Body
• Black Billet Aluminum
Includes:
• Purge Valve Relocation Plate
• O-Ring
• Installation Hardware
JEGS FORD 9” TRUCK REAR
DISC BRAKE CONVERSION KIT
■ JEGS Ford 9 in. Rear Disc Con-
version Kits combine the best
features available to make your
selection and installation easy.
In addition to calipers with pads,
rotors, brake hoses and mount-
ing hardware, each disc brake kit
includes all of the brackets and
flanges for the Small Ford, Early
Big Ford, and Late Big Ford hous-
ing ends. We offer standard (coil
springs with both shocks behind
rear axle) or staggered (leaf springs
with one shock forward of and one
shock behind the rear axle) conver-
sion set-ups, with or without park-
ing brakes. Our premium High-
Performance Rear Brake Kits come
complete with cross-drilled and
slotted rotors, plus braided stain-
less steel hoses. See each item for
specific details.
• Fits Pre 1987 Ford F-Series Truck
Rear Axle
• Premium Kit
Includes:
• 11 in. Cross-Drilled & Slotted
Rotors
• Braided SS Brake Hoses
• Loaded Calipers
• Hardware
JEGS EXHAUST PIPE CUTTER
■ For ¾” to 3-1/2” Diameter Ex-
hausts, the JEGS Pipe Cutter has
an adjustable design with a 12 in.
cutter chain allowing you fit into
tight spaces on the vehicle to achieve
the exhaust flow you desire.
• 12 in. Adjustable Chain with 15
Cutting Wheels
• Cuts from 3/4 in. to 3 1/2 in. Di-
ameter Pipe
• 4 in. Red Handles
Issue 155