PRODUCTS & PRESS
MOROSO SBC DRAG RACE,
8-1/4” DEEP, POWER KICK-
OUT, STEEL OIL PAN
■ Moroso introduces Part No.
21015, an SBC Drag Race 8-1/4”
deep, Power Kick-Out Steel Oil
Pan that is for SBC Pre-1980 engine
blocks with driver-side dipstick
and Dart Little M engine
blocks with 4 bolt non-radiused
front main caps. Fits Super Stock/
Bracket Cars, Dragsters, Roadsters
or Body Cars. This 7 quart capacity,
steel core based oil pan utilizes
a stock pan rail bolt pattern and
clears 4.00” stroke with steel or
aluminum rods. Has a passengerside
kick-out and a solid louvered
tray with main cap partitions for
maximum power and oil control.
For use with 168 and 153-tooth
flywheel combinations and has a
dipstick provision in the sump.
JEGS STAINLESS
STEEL LOCKING TIES
JEGS Stainless Steel Locking Ties
are fireproof, rust-resistant, and
non-magnetic. Designed to withstand
temperatures up to 2,500
degrees F, making the ties ideal for
extreme heat applications, such as
securing exhaust wrap.
Locking Ties
• Withstands up to 2,500
degrees F
• Stainless Steel
Includes:
• (1) Locking Tie Tool
• (8) 9 in. Ties
• (4) 14 in. Ties
JEGS FUEL PRESSURE
GAUGE
Vintage Style Gauges. JEGS Muscle
Car Gauges have the Retro look you
want with the modern technology
you need to accurately track and
monitor your ride’s performance.
Gauges are sold individually or as
a complete set.
Fuel Pressure Gauge
• 0-100 psi
• 2 1/16 in. Diameter
• 90 degree Stepper Motor
• Through Dial LED
• Black Gauge Face
• Mint Green Number Color
• Polished Stainless Steel Step Bezel
MOROSO DONOVAN, DRC2,
MERLIN, DRAG RACE, OIL
PAN
■ Moroso introduces Part No.
21598, a Donovan, DRC2, Merlin,
Drag Race, Two Piece, Dry Sump,
Aluminum Oil Pan that fits Donovan
700, DRC2, Donovan Style
blocks with 10” and 10-3/8” wide
pan rails and 2-piece rear main
seal, accepts 5.30” stroke with
aluminum rods. The oil pan is
fully fabricated from aluminum
with billet flanges that join the
top of the oil pan with the removable
O-ringed bottom. Features
billet end seals that ensure a consistent
sealing surface to billet
front covers and rear main caps.
Incorporates a Power Kick-out
design for maximum horsepower,
removable crank scraper, and internal
uni-directional screen. Has
a (4) -12AN female billet aluminum
pickups.
JEGS 5” ELECTRIC
TACHOMETERS
LED Gauges Give the Readings
You Need. JEGS 5-inch Tachometers
and Speedometers feature
through-the-dial LED lighting
with a glowing 3D pointer for
supreme night-time viewing.
Designed for in-dash mounting,
these gauges are available in your
choice of a black face with white
numbers or a white face with black
numbers and come complete with
a polished stainless-steel bezel.
5 in. Electric Tachometer
• White Face with Black Numbers
• Polished Stainless Steel Step Bezel
• 0-10,000 RPM
• LED Lighting
• Works with 1-12 Cylinder Engines
• In-Dash Mounting
Includes:
• (6) 22-18 AWG Spade Connecters
JEGS SFI BELLHOUSING
FOR AFTERMARKET GM
TH-400
Refresh Your TH-400. JEGS SFI
Bellhousing is specifically engineered
with an open bottom to allow
for converter access, a reduced
diameter to give you better floorboard
clearance, and a contoured
mounting flange to match the rear
of your engine block. SFI 30.1 certified,
the bellhousing is cast from
quality 6061 T6 aluminum and
heat-treated to fit GM’s TH-400
transmission.
Bellhousing
• GM TH-400
• SFI 30.1
• Contoured Mounting Flange
• Open Bottom
• Reduced Diameter
• External Shields Not Required
• Heat-Treated
• 6061 T6 Aluminum
58 | Drag Illustrated | DragIllustrated.com Issue 157