STAGE III KIT Ladder Bar Suspension and Subframe

3628 Complete ladder bar subframe with Strange all aluminum coil overs ( unwelded ) $ 1,429.84 NOTE : Rear end housing not included . Fabricated 9 ” and Dana housings available . Available welded or unwelded .

STAGE II Kit Ladder Bars with Shocks and Springs

Outlaw “ TRIPLE ” Adjustable Ladder Bars

The ultimate ladder bar for heavy , high horsepower race cars . 360 degree housing brackets w / integrated shock mounts . Lightweight Chromoly construction for strength . Includes all rod ends , hardware and brackets .

3606 Outlaw adjustable ladder bar kit $ 569.95 pr 3606A Outlaw adjustable ladder bar weld-up kit $ 544.95 pr coil overs $ 1,044.40

STAGE I KIT Ladder Bar

• Adjustable Pro 1 Ladder Bars

• Ladder Bar Cross Member and Brackets

• Diagonal Link

3627 Stage l ladder bar suspension with 1-3 / 4 ” round cross member $ 487.75 Add $ 22.00 for panhard bar

32 ” Double Adjustable PRO 1 Ladder Bars

Easily installed and tuned for maximum traction , ladder bars can be installed on virtually any car with tremendous results . As with most of our suspension components , our ladder bars

carry the Chassis Engineering lifetime limited warranty !

3607 32 ” Double adjustable Pro 1 ladder bar $ 330.70 pr

• Housing Brackets

• Bracket Boxing Strips

• Hardware and Detailed Instructions

Ladder Bar Crossmembers

Chassis Engineering offers a complete line of ladder bar cross members . The 1 / 4 ” thick , laser cut , profiled brackets offer 5 holes of adjustment to dial your car in correctly . Round tube cross members are offered in 1-3 / 4 ” x . 134 mild steel and 1-5 / 8 ” Moly . Rectangular cross members are 2 ” x 3 ” x . 083 and . 120 wall thickness .

3819

Fabricated 9 ” Rear End Housing

Housings available in mild steel or chromoly from bare housing to complete rear ends . See our website for ordering spec sheet or call one of our techs .

3718

Economy Spring Over Shock

A low cost alternative to the more expensive coil-over systems , these coil spring mounts provide many of the same benefits at a fraction of the cost . These kits are ideal for street rods and Pro Streeters . Delivered complete with upper mounts , adjustable lower mounts , shocks , springs , hardware and complete instructions .

5076 Coil spring and shock mounts $ 311.80 pr

Mild Steel – 3 ” x . 250 ” axle tubes standard 4225 56 ” wide with housing ends not welded $ 664.95 4226 Any width with housing ends welded $ 734.95 4227 Any width with housing ends & back brace welded $ 884.95 Complete with brackets shown . Call for pricing . Call for Moly pricing .

Ladder Bar Safety Brackets

Some kind of front retaining device is required on ladder bars by all sanctioning bodies . Our simple kit will make you legal and give you peace of mind . Kit includes all necessary brackets and hardware to add safety retainers to any ladder bar .

Ladder Bar Adjusters

Build your own ladder bars or convert your old non-adjusting ladder bars to adjustable by simply adding our adjuster kit . Contains two adjusters with 3 / 4 ” thread , jam nuts and wrench flats .

Driveshaft Safety Loops

Some kind of driveshaft loop is required by all sanctioning bodies to contain the driveshaft in the event of U-joint or driveshaft failure . Chassis Engineering has more different loops for more applications than anyone . All loops guaranteed to pass tech . Visit our website for a complete list of available sizes . From $ 14.15

TRACK TESTED

ROD END SAFETY BRACKETS

LOWER ADJUSTER LINK ( Standard )

4035

4037

RACE PROVEN

Leaders in chassis technology for over 35 years

Toll Free Ordering : 800-327-9402 / Info & Tech : 561-863-2188

Browse our entire product line @ chassisengineering . com