Great Parts. Fast Cars. It’ s what we’ ve been doing for over 40 years.
TRACK TESTED RACE PROVEN AMERICAN MADE
Panel Fastener Tool & Wheelie Bar Holder
GM 2010 $ 34.95 Wrench not included
|
Lighted Wheelie Bar Wrench
CE 2756 $ 109.95
|
Hemi Plug & Tray Kit
GM 2020 $ 169.95
|
Tubing Size Tool
GM 2050 $ 11.95
|
Panel Fastener Tool & Holder
GM 2000 $ 21.95
|
|
Braille Battery Holder
1030 Braille battery holder $ 89.95
STAGE I KIT / Ladder Bar
3627 Stage l ladder bar suspension with 1-3 / 4” round cross member $ 781.85 Add $ 22.00 for panhard bar
Chevy Mid Plate
1 / 4” thick aircraft quality aluminum and measures 24” x 24”. Pre drilled for crankshaft, starter, bellhousing bolts and fits either big block or small block Chevys.
3696 Chevy mid plate, small hole $ 199.95 3696-2 Chevy mid plate, large hole $ 199.95
Driveshaft Safety Loops
Chassis Engineering has more different loops for more applications than anyone. All loops guaranteed to pass tech. Visit our website for a complete list of available sizes.
From $ 36.95
Drive Shaft Enclosures
Designed to save the driver from injury in the event of a driveshaft or u-joint failure. Tunnels are made out of. 050 Moly and fit inside any driveshaft loop with an inside diameter of 6 inches. They are now mandated in Pro-Mod, Pro Stock and Top Sportsman. Sold in pairs.
4015 12” long $ 194.95 pr 4016 18” long $ 215.95 pr 4017 24” long $ 230.95 pr
4037
Drive Shaft Tunnel Kits
4050 12” Tunnel w / one loop kit( Moly) $ 244.95 4051 18” Tunnel w / two loop kits( Moly) $ 314.95 4052 24” Tunnel w / two loop kits( Moly) $ 333.95( Kits are not welded)
2740
Ultra-light Aluminum Competition Steering Wheel
13” Steering Wheels weigh in at 13.6 oz. and have placement for 5 buttons. Mounting is designed for any 5 bolt standard mounting hub. Available in natural aluminum and powder coated black finishes. 3 bolt to 5 bolt mounting adapter avaialble separately. 2740 Natural $ 167.95 / 2741 Black $ 178.95 / 2742 Carbon illusion $ 225.95
Quick Release Steering Hubs
Hubs are required in most tube frame cars. Allows for quick removal of the steering wheel for a number of safety and convenience benefits. Hubs release with the push of a button, accepts most popular steering wheels and works with any 3 / 4” tubular column.
WIL 270-2016 |
Wilwood quick disconnect steering hub |
$ 29.90 |
STR Q-1200 |
Strange Eng. steering hub SFI approved |
$ 135.00 |
STR Q-1200 NBTI Strange Eng. steering hub SFI approved, titanium shaft $ 165.00 |
Racer’ s Choice Rack and Pinion
Our lightweight racks are easy to mount and with the wide variety of adapters and U-joints available, make this the racer’ s choice. Our racks offer a precise, solid steering feel and control that’ s just not available with other steering systems. All racks are new not remanufactured, and include factory tie rods.
2705‘ 71-‘ 72 Pinto rack & pinion $ 236.95 2701‘ 71-72 Pinto Rack mount kit $ 78.95
Battery Mount Kit
Easy-to-install for tube chassis or cars with rear subframe kits. Simple design, lightweight and accommodates virtually any standard automotive battery.
3712 Battery mount kit $ 68.95
Sheet Metal Battery Trays
Easy-to-install lightweight battery trays for one or two batteries. Will accommodate virtually any standard automotive battery.
4716 Single sheet metal tray $ 136.95 4717 Dual sheet metal tray $ 157.95
Braille Battery Mount
Chassis Engineering has designed a specific mount for the Braille batteries which can be mounted in the drivers compartment. Complete with all hardware.
4718 Braille battery mount $ 136.95
4716
4717
Top Gun Four-Link Kits
Ideal for high horsepower applications. Constructed from 1 / 4” thick steel plate( Moly optional) with provisions for lateral support tube for additional strength. Housing brackets are available with or without adjustable shock mount bracket holes. Designed for 5 / 8” rod ends allowing for tighter hole spacing offering more I. C. points. Four-link tubes are Moly with weld in Moly tube adapters.
3515 Top Gun Four-Link kit w / shock mount brackets( less rod ends) $ 699.95
Lightweight Steel NOS Bottle Mounts
Pro’ s choice of for mounting nitrous bottles securely and professionally. Shipped unfinished, ready for plating or painting after permanently welded or bolted in place with built-in mounting tabs. They have rubber on all surfaces that touch bottle sides along with aluminum mounting rods and easy grip hold down knobs. Designed for 10 pound bottles. 15 pound bottles also available.
5501
5503
5500
5500 Dual nitrous bottle mount, stand up |
$ 194.95 |
5501 Single nitrous bottle mount, stand up $ 136.95 |
5502 Dual nitrous bottle mount, lay down |
$ 194.95 |
5503 Single nitrous bottle mount, lay down $ 136.95 |
5520 Ball valve mounting bracket |
$ 3.95 |
5521 Hi-flow nitrous shut-off valve |
$ 107.95 |
5502 5521
5520
Toll Free Ordering: 800-327-9402 / Info & Tech: 561-863-2188
Browse our entire product line @ chassisengineering. com