Ultra-light Aluminum Competition Steering Wheel

13” Steering Wheels weigh in at 13.6 oz. and have placement for 5 buttons. Mounting is designed for any 5 bolt standard mounting hub. Available in natural aluminum and powder coated black finishes. 3 bolt to 5 bolt mounting adapter avaialble separately. 2740 Natural $ 167.95 2741 Black $ 178.95 2742 Carbon illusion $ 225.95

2740

Chevy Mid Plate

1 / 4” thick aircraft quality aluminum and measures 24” x 24”. Pre drilled for crankshaft, starter, bellhousing bolts and fits either big block or small block Chevys.

3696 Chevy mid plate, small hole $ 199.95 3696-2 Chevy mid plate, large hole $ 199.95

Quick Release Steering Hubs

Hubs are required in most tube frame cars. Allows for quick removal of the steering wheel for a number of safety and convenience benefits. Hubs release with the push of a button, accepts most popular steering wheels and works with any 3 / 4” tubular column.

Braille Battery Mount

Chassis Engineering has designed a specific mount for the Braille batteries which can be mounted in the drivers compartment. Complete with all hardware.

4718 Braille battery mount $ 136.95

Battery Mount Kit

Easy-to-install for tube chassis or cars with rear subframe kits. Simple design, lightweight and accommodates virtually any standard automotive battery.

3712 Battery mount kit $ 68.95

Drive Shaft Tunnel Kits

4050 12” Tunnel w / one loop kit( Moly) $ 244.95 4051 18” Tunnel w / two loop kits( Moly) $ 314.95 4052 24” Tunnel w / two loop kits( Moly) $ 333.95( Kits are not welded)

Drive Shaft Enclosures

Designed to save the driver from injury in the event of a driveshaft or u-joint failure. Tunnels are made out of. 050 Moly and fit inside any driveshaft loop with an inside diameter of 6 inches. They are now mandated in Pro-Mod, Pro Stock and Top Sportsman. Sold in pairs.

4015 12” long $ 194.95 pr 4016 18” long $ 215.95 pr 4017 24” long $ 230.95 pr

Driveshaft Safety Loops

Chassis Engineering has more different loops for more applications than anyone. All loops guaranteed to pass tech. Visit our website for a complete list of available sizes. From $ 36.95

A few must haves...

4037

Panel Fastener Tool & Wheelie Bar Holder

GM 2010 $ 34.95 Wrench not included

Racer’ s Choice Rack and Pinion

Our lightweight racks are easy to mount and with the wide variety of adapters and U-joints available, make this the racer’ s choice. Our racks offer a precise, solid steering feel and control that’ s just not available with other steering systems. All racks are new not remanufactured, and include factory tie rods.

2705‘ 71-‘ 72 Pinto rack & pinion $ 236.95 2701‘ 71-72 Pinto Rack mount kit $ 78.95

Top Gun Four-Link Kits

Ideal for high horsepower applications. Constructed from 1 / 4” thick steel plate( Moly optional) with provisions for lateral support tube for additional strength. Housing brackets are available with or without adjustable shock mount bracket holes. Designed for 5 / 8” rod ends allowing for tighter hole spacing offering more I. C. points. Four-link tubes are Moly with weld in Moly tube adapters.

3515 Top Gun Four-Link kit w / shock mount brackets( less rod ends) $ 699.95

Lighted Wheelie Bar Wrench

CE 2756 $ 109.95

Hemi Plug & Tray Kit

GM 2020 $ 169.95

5501

5500

5503

4717 4716

Sheet Metal Battery Trays

Easy-to-install lightweight battery trays for one or two batteries. Will accommodate virtually any standard automotive battery. 4716 Single sheet metal tray $ 136.95 4717 Dual sheet metal tray $ 157.95

Lightweight Steel NOS Bottle Mounts

Fabricated with mounting tabs for weld-in or bolt-in application to mount nitrous bottles securely and professionally. Includes rubber on all surfaces that touch bottle sides along with aluminum mounting rods and easy grip hold down knobs. Designed for 10 pound bottles. 15 pound bottles also available. Shipped unfinished.

5502

5520

5521

Toll Free Ordering: 800-327-9402 / Info & Tech: 561-863-2188

Browse our entire product line @ chassisengineering. com